#Wifi scanner linux Bluetooth#
On Linux it works with most Wi-Fi cards, Bluetooth interfaces, and other hardware devices. The size of the arc in the circle and the darkness of the color indicates the signal strength of the Wifi AP. Kismet is a wireless network and device detector, sniffer. I fallback to Settings.ACTION_WIFI_ADD_NETWORKS where possible The Wifi Scanner App is built under Linux, and it shows a circle shaped window with the surrounding access point names.If the user is not connected to the right wifi I would try to use the _WIFI action to let the user to connect to the right wifi.However the ConnectivityManager API don't return the actual SSID, that drives me crazy. To do so I already own the permissions ACCESS_WIFI_STATE, ACCESS_NETWORK_STATE, ACCESS_COARSE_LOCATION and ACCESS_FINE_LOCATION. I need to verify if the steps before worked and the user is actually connected to the desired wifi.
#Wifi scanner linux android#
On Android 11+ I can fallback to the Settings.ACTION_WIFI_ADD_NETWORKS intent which can always add Wifis (with the downside that the user can share the wifi password).On Android 10 I can just check if I'm connected with the right wifi, well at least theoretically (see step 7). When the user rejected my suggestion I'm almost out of the game I can never ask the user again (well technically there is a well hidden feature where you can switch the permission, but no user will ever find it).However I still don't know if the device actually connected with the wifi. On Android 11 this is possible (see step 2). I cannot verify on Android 10 if my suggestion was accepted.
Wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0ĭefault-client-tx-limit=0 hide-ssid=yes security-profile=default compression=noġ R name="wlan2" mtu=1500 l2mtu=1600 mac-address=B8:xx:xx:xx:xx:03 arp=enabled interface-type=Atheros AR9888 mode=ap-bridge ssid="xxxxx-5" frequency=5660īand=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX secondary-frequency="" scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 0 R name="wlan1" mtu=1500 l2mtu=1600 mac-address=B8:xx:xx:xx:xx:04 arp=enabled interface-type=Atheros AR9300 mode=ap-bridge ssid="xxxx-2" frequency=autoīand=2ghz-b/g/n channel-width=20/40mhz-XX secondary-frequency="" scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled
0 kommentar(er)
